How Often Should Table salt be Added to a Softener Brine Tank?

How Often Should Salt Be Added to Softener Brine Tank Header

Perchance yous recently added salt to your softener'due south brine tank nevertheless it already looks like it's time to add more. Now yous're wondering if your softener is working properly and how much salt an average softener should become through?

If you own a water softener, yous'll want to check your softener's brine tank a least once each calendar month to make certain you lot accept enough salt. About h2o handling experts recommend that the level of salt should be three to iv inches above the water level in the brine tank.

softener salt usage: How much salt should a softener use?

How oftentimes Should You Add Salt to the Brine Tank?

How much table salt you'll need to add will depend on the level of "hardness" in your h2o and the quantity of water your household consumes. Industry standard is that the average family of four with h ar d water (7-10 grains per gallon hardness level) volition utilize well-nigh nine to 10 pounds of salt each calendar week or ane 40-lb purse of salt each month.

Having mentioned the manufacture standard for common salt usage with a water softener, information technology is import emmet to notation that most water softening systems in the industry can besides be adapted to use more or less table salt on a monthly ground.

The amount of table salt used for each regeneration cycle will determine the corporeality of gallons of water that can exist softened earlier needing to regenerate.

And so there is an inherent trade off:

1) increase the amount of table salt each regeneration cylce and decrease the amount of regeneration cycles over time or…

2) decrease the amount of salt each regeneration cycle but increase the amount of regeneration cycles over time.

Table salt Usage Increase

You may find that you're going through more than the "one-a-month" bag of salt…

shutterstock_109236224

  • If you lot accept a larger chapters water softening organisation than the industry standard of 9″ bore softening tank
  • If your water is very difficult (higher up ten grains per gallon hardness)
  • If your water has an fe level over 2 parts per million
  • If your family size has inverse. A larger family unit generally consumes more than water which volition cause your softener to regenerate more frequently, and thus use more salt.
  • If your local water handling specialist has adjusted your valve settings for the softener to regenerate more than often and thus consume more salt.
  • If your surface area is experiencing drought atmospheric condition, your water treatment professional may adjust your softener's valve settings to conserve water, but use more than common salt. (This aligning could cause your h2o to taste more salty correct afterwards the arrangement regenerates, so talk this over with your water specialist).

Fortunately, the valve control on many water softeners and conditioners will do all of the calculations for y'all regarding when to regenerate. Then you'll merely need add together more salt every bit it is used up. Many homeowners buy and add 120 pounds (three 40-lb bags) of salt at a fourth dimension and so they only have to add salt once every 3 months.

Cheque with your local h2o specialist for specifics on how much table salt your system is using and how oft to buy common salt.

Why Does the Salt in my Brine Tank Seem to Dissolve then Rapidly?

You may notice a difference in how speedily the salt in the brine tank seems to dissolve. This could exist because you've inverse the blazon of salt you're using. For example, if yous've gone from solar to evaporative pellets, some salt types are denser than others. Discuss the type of salt yous're using with your water treatment specialist or check your organisation'southward owner's manual every bit settings can be adjusted per blazon of common salt used. At WaterTech, nosotros recommend using either potassium chloride or evaporated water softener salt pellets with a purity rate of 99.5 percent.

What if I Forget to Add Salt?

If you forget to cheque table salt levels in the brine tank and run out, you simply won't have soft water. Suddenly seeing spots on your glass shower door might be a dead requite abroad. If you do run out of salt, keep in listen that it may take 2-3 days to get softened water throughout the business firm over again (information technology normally takes more 1 regeneration cycle). To guarantee a satisfactory production of softened water, the salt level should exist kept at least half-full in the brine tank at all times.

WaterTech's Reionator H2o Conditioning Organisation Keeps information technology Simple

WaterTech's Reionator has a 5-button "Triton" metered valve. This valve is automatically set to "consumption mode" which means that information technology keeps runway of how much h2o is being used by the household, and even anticipates consumption.

For case, if you're close to needing regeneration, the meter will recognize if the fourth dimension is belatedly in the evening and the organization will go ahead and regenerate overnight to make sure in that location's enough softened water for morning kitchen and showering needs. It'south then smart, it can conceptualize your family unit'south water usage which makes it twoscore per centum more than efficient than the competition in water and salt conservation.

Ask your local WaterTech dealer to tell you lot more than about the Reionator Water Conditioning Arrangement.

find a watertech dealer

subscribe to our blog